MainMenu

Welcome About Us Latest News/Results Photos Reid Cases Services
Transmissions

Contact
Tech Tips
Victor Bray ProFlite Bruno Drive Reactor Flexplates VP Racing Fuels Garage Sale
   

 

   

   We Recommend...

 

      Phone: (02) 9526 7535
   

 

   

"We are a supplier of

REACTOR Aluminium

Flexplates...
   

 

   

"We use REID Cases

for all our High Performance

Transmissions...
   

 
 
   

 

 

  AUTHORISED AUSTRALIAN PROFLITE DEALER 

 

 

 

THE ULTIMATE 3 SPEED TRANSMISSION

 
Designed and built for:

  • Competition Eliminator

  • Super Stock
Transmissions come complete with SFI Certification which meets all ANDRA specifications.

 

Proflite transmissions are designed and built in the United States.

We at Protrans are authorised to service al Proflite transmissions.

 

 

 

 
THEY ARE:

  • LIGHT WEIGHT

  • HAVE LOW DRAG

  • OPERATE AT A LOWER PRESSURE

With this combination it all adds up to a faster Elapsed Time, and is capable of handling up to 1400 Horse Power.

 

 

Over 60 Ratio's Available

 

Call us today for more information on your application

 
We at Protrans......

  • SUPPLY COMPLETE TRANSMISSIONS

  • SERVICE

  • REPAIR

  • OVERHAUL

 
   

 
   

IMPORTANT

DRIVETRAIN

4.2.1 Auto Transmission/Protection

The following vehicles using automotive based automatic transmissions, must be fitted with an approved ballistic blanket, a protective shield fabricated from a minimum 6mm (¼ inch) aluminium or 3mm (⅛ inch) steel offering 180 degrees of protection (pan rail to pan rail), mounted securely with two steel straps 3mm thick and 25mm wide passing under the transmission, or any transmission shield meeting SFI 4.1 installed to manufactures requirements.

  • All dragsters / altereds/ funny cars.

  • All vehicles using transmission brakes.

  • All supercharged vehicles (inc nitrous oxide) with and ET quicker the 11.00 (¼ mile) / 7.00 (⅛ mile).

  • All vehicles quicker than 10.00 (¼ mile) / 6.50 (⅛ mile).

Any external shield or blanket must be removed from the vehicle for checking during the Technical Inspection.